For every frequency there is an antenna that is perfect for radiating at that frequency. Unfortunately, it would be unrealistic to carry a separate antenna for every frequency that a communications center is capable of radiating. To overcome this problem, we use ANTENNA TUNING to lengthen and shorten antennas ELECTRICALLY to better match the frequency on which we want to transmit. Simply put, the antenna does not physically change length; instead, it is adapted electrically to the output frequency of the transmitter and "appears" to change its physical length. Antenna tuning is done by using antenna couplers.
The antenna on the ant was long
what is a antonym for antenna
A bus coupler is generally a circuit breaker which helps in connecting one bus to another thereby enabling uninterrupted supply in the event of fault in one bus.Switch over from one bus to another can be done either in auto or manual mode.
The summit of sky scraper is a antenna.Fixing: a antenna to an antenna, add an n after a.
It depends on the usage. With respect to insects it would be "antennae". However, with respect to radio antenna and similar it would be "antennas"
An antenna coupler is usually placed at the base of the vertical stabilizer to connect the antenna at the leading edge of the stabilizer to the rest of the system.
Compressed air usually is not filter and this could introduce impurities into the coupler system resulting in arching.
1.transmission and reception 2.impedence matching 3.sensor to em waves 4.suppressing
50% Coupler :D
No, there are 6 different tapping mechanisms. the US Sankey the European Sankey the Bass Ale Coupler the German Coupler the Guinness Coupler and the M-System Coupler
Yes it is a female to female coupler
A coupler is the connection point mounted on the trailer which connects the trailer to the vehicle.
A directional coupler is a passive device used in radio technology. The purpose of a directional coupler is to couple electromagnetic power to be used in another circuit.
An acoustic coupler is an interface device for coupling electrical signals by acoustical means.
Andrew Jackson Beard
its a opto coupler. And generaly used for high speed switching.
At pilot light, where pilot light flame goes directly onto thermo coupler.