In a generator, an armature is spun inside a magnetic field. The armature consists of several coils which generate electrical energy as they spin through the magnetic fields. "Brushes" (electrical devices to transfer the electrical energy from the moving armature) conduct the electrical energy to a wire. The strength of the electrical output can be controlled by varying the strength of the stationary magnetic field that is OUTSIDE the spinning armature. If that magnetic field is to be changed, it typically must be an electromagnetic.
An ALTERNATOR is exatly the opposite. The brushes make contact with two spinning rings. The rings are connected to coils, and when voltage is applied the armature (in the case of an alternator it is called a "rotor") becomes a spinning electromagnet. A stationary coil or set of coils, depending on the complexity of the armature, generates electrical current as the magnets pass by.
An alternator produces "alternating current" electricity which must be converted to "direct current" in the case of automobiles. The conversion is relatively simple, using what is called a "diode plate", which is as the name suggests, a collection of diodes.
difference between one- ones
What is the difference between realism and liberalism?
what is the difference between audience and spectator
Difference between naatak and ekanki
difference between roleplay and drama
what is difference between dynamic and volumatic compressor
the fundamental difference between a battery and a generator is that a battery uses chemicals
it is
The difference between a commercial power generator and a regular power generator is that a commercial one is much expensive than the regular one. It's much better to purchase the regular generator if your not planning to use it for business purposes.
A rotary compressor has screws or gears that compress a gas. A reciprocating compressor has a piston in a cylinder compressing the gas.
this tool is not available
No, it is not safe to connect a 15 amp air compressor to a 25 amp generator. The generator's output exceeds the maximum amperage of the air compressor, which could potentially damage the compressor or cause overheating. It is recommended to use a generator that matches the power requirements of the air compressor for safe operation.
magneto is dc
There is no difference. A blower is just a term used for a supercharger. A compressor is any machine that compresses a gas for many different purposes. A supercharger in its many forms is a type of compressor
Yes, you can power an air compressor with a 1000-watt generator, but it depends on the compressor's specifications. Many small, portable air compressors require around 500 to 700 watts, making them suitable for a 1000-watt generator. However, if the compressor has a high starting wattage due to a motor startup surge, you may exceed the generator's capacity, leading to potential overload. Always check the compressor's wattage requirements before connecting it to the generator.
To the untrained eye, they appear identical in both form and function.
The difference between a separately excited DC generator and a Shunt DC generator is that for a separately excited Dc generator , the excitation field winding is supplied by an external source different from that supplying the armature while for shunt generator, the excitation field windind is connected in series with the armature and supplied by a single source.