0
What else can I help you with?
Why are small gaps left behind the girders mounted in walls?
Small gaps are left behind the girders mounted in walls to give room for expansion. Usually one end of the iron structure is fixed and the other end is allowed to expand in summer into the left out gap.
What is As fast as an eagle as slow as a slug as tall as a tree as small as a bug sometimes in front sometimes behind never on top and always aligned what is it?
A shadow
What part of speech is the word mansion?
In my neighbourhood a big mansion is visible behind all the small houses. Mansion (definition): Villa, big house
Word cline of small?
small,too small,tiny
Why is it small?
There is no answer to that. It is just small.
Why is small gap left the wall while mounting a girder for roofing?
becouse when summer come it come to its own place therefore small gapes are lefted behind the girders.
Difference between plate girder and gantry girder?
plate girder is a vertical section which supports the beam while gantry girder is a horizontal section which supports the othet small beams.
Which roofing contractors are available in Boston for small companies requests?
There are many quality roofing companies available in Boston, especially when looking for small companies. DiPierro Construction, GMB Property Services, Alexander Roofing Co, Jancon Exteriors, Willard Company, and Roof Masters are some of the many that service the Boston area.
How heavy is a steel girder?
The dimensions and specifications of a steel girder can affect its weight. However, a steel girder typically weighs between 10 and 20 pounds per foot. As a result, the typical 20-foot steel girder might weigh between 200 and 400 pounds. It's important to remember that heavier, more specialized girders may be used. The specific engineering specifications or a structural engineer should be consulted for precise measurements.
Which local company would be the best to consult regarding the tin roofing needs for the various small buildings on my land?
There are a number of reputable companies that can offer you assistance in determining your tin roofing needs. I would recommend Metal Roofing Source. http://www.metalroofingsource.com/
Are there any roofing contractors or companies near Salem, OR?
Yes, there are several roofing contractors in and around Salem, OR. A few of these contractors include Anderson Roofing Co Inc., Mc Gilchrist & Sons Roofing, and Northwest Professional Roofing. There are dozens of roofing contractors or companies near Salem, OR. One of the best is Cascade Roofing (503) 363-4823
Why does a truck have two gas tanks instead of one big tank?
It is usualy easier to find mounting space for two small tanks rather that one large one.It is usualy easier to find mounting space for two small tanks rather that one large one.
What kind of high quality mirror can I buy for under $100?
It dependes up on size and mounting. For $ 100 you can get good Belgium mirror of small size and you can make frame and mounting yourself.
Check The Edges Of Rolled Roofing?
If your place of business has had a roof put on it with rolled roofing, make sure that you frequently check the edges. Even if the roofing team has done a very good job and secured the roll as well as they can, this is where it will typically pull back from the edge of the building. This can let rain and moisture in. Even a small crack can be very bad for the integrity of the building, so you need to look at these edges and find any problems while they are still small in order to stop them.
How is a primer bulb hooked up to a zama carbuator?
Actually Mine (on a Homelite Weedeater) is located on the underside of the carburerator, and is intigrated by means of a small flat mounting flange wich has two mounting screws on opposing and diagonal sides. thes two small screws are the only thing holding this mounting flange and primer bulb in place. This message is from genusrightwingus, I hope you find this informative.
Would a panavise camera mount fit a small digital camera?
It depends on the model of the camera. There are many small digital cameras on the market. Some have camera mounting apparati and some do not. It is important to check what kind of mounting options there are on your camera before you purchase any accessories.
Why a mounting needle is used?
A mounting needle is used primarily in microscopy and histology to manipulate and position small specimens or tissue sections on slides. Its fine, pointed tip allows for precise handling, enabling researchers to place samples accurately without damaging them. Additionally, mounting needles can help in the application of mounting media, ensuring even distribution for optimal viewing under the microscope.
