answersLogoWhite

0

Obviously the problem with pony walls or half walls is that the have a huge tendency flex or move. Treat the wall like you would a railing on a deck or set of stairs. There needs to be a very strong base to anchor to. You can have a solid steel wall but the floor will allow it to move. If you cannot find floor joists to anchor to, you need to create a one. For me there is no other way. If there is access from below like a basement that's great. If on the second floor you need to open up the floor and expose the joists and sister 2X6 or greater on the joists or make a header spanning between them( do this every 2-3 feet for the length of the wall). Now you will have a strong base to anchor to. Another trick I learned from a welder is to have 3" angle iron welded at 90 degrees. For a short wall like 4' two will do. Bolt them to the floor with lag bolts, min 3.5" (into the solid base you made or joists) Build your wall around the iron and carriage bolt the frame to the metal. You will have a far superior wall that will barley budge. When building the wall also use large screws. 3" or better. Nails will back out of the studs very easy when pressure is applied. Screws won't.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How can I replace the subfloor under a wall?

To replace the subfloor under a wall, you will need to first remove the wall and any flooring covering the subfloor. Then, carefully cut and remove the damaged subfloor material. Next, measure and cut a new piece of subfloor to fit the space. Install the new subfloor, making sure it is level and secure. Finally, replace the wall and flooring. It is important to follow proper safety precautions and consult a professional if needed.


How can I install a wall anchor properly?

To install a wall anchor properly, first choose the right anchor for your wall type. Then, drill a hole in the wall, insert the anchor, and tighten it securely. Finally, attach the item to the anchor using a screw. Make sure to follow the manufacturer's instructions for the specific anchor you are using.


How can I effectively remove a wall anchor?

To effectively remove a wall anchor, first, use a screwdriver to unscrew the anchor from the wall. If the anchor is stuck, you can try using pliers to pull it out. Another method is to insert a screw into the anchor and pull it out with a hammer or pry bar. Be careful not to damage the wall while removing the anchor.


How do you put a plastic anchor in a wall?

To put a plastic anchor in a wall, first drill a hole in the wall using a drill bit that matches the size of the anchor. Insert the anchor into the hole and gently tap it in with a hammer until it is flush with the wall. Then, insert a screw into the anchor and tighten it securely.


What is the best anchor to use for securing a tile wall?

The best anchor to use for securing a tile wall is a plastic expansion anchor.


How can I safely remove an anchor from a wall?

To safely remove an anchor from a wall, start by using a screwdriver or drill to loosen the anchor. Then, gently pull the anchor out of the wall using pliers. Be careful not to damage the wall or surrounding area during the removal process.


How can I safely remove an anchor from the wall?

To safely remove an anchor from the wall, first, use a screwdriver or drill to loosen the screw holding the anchor in place. Once the screw is removed, gently pull the anchor out of the wall. If the anchor is stuck, you can try using pliers to carefully wiggle it out. Be cautious not to damage the wall while removing the anchor.


How do I properly install a screw wall anchor to securely hang a heavy object on the wall?

To properly install a screw wall anchor to securely hang a heavy object on the wall, follow these steps: Choose the right size and type of wall anchor for the weight of the object. Use a drill to create a hole in the wall that is slightly smaller than the anchor. Insert the anchor into the hole and gently tap it in with a hammer until it is flush with the wall. Screw the anchor into the wall until it is secure. Hang the object on the anchor and make sure it is securely in place before letting go.


How can I remove a wall anchor effectively?

To remove a wall anchor effectively, first, use a screwdriver to unscrew the anchor from the wall. If the anchor is stuck, you can try using pliers to grip and twist it out. Another method is to use a hammer and nail punch to push the anchor through the wall. Be sure to patch up the hole left behind after removing the anchor.


What is the best way to install a hollow wall anchor securely?

To install a hollow wall anchor securely, first drill a hole in the wall, insert the anchor, and tighten it with a screwdriver until it is flush with the wall. Make sure the anchor is rated for the weight of the object you are hanging.


How can I remove an anchor from a wall effectively?

To remove an anchor from a wall effectively, you can use a screwdriver or drill to loosen the anchor and then gently pull it out. If the anchor is stubborn, you can try using pliers to grip and twist it out. Be careful not to damage the wall in the process.


How to install a wall anchor in plaster?

To install a wall anchor in plaster, first choose the appropriate anchor size for your project. Next, use a drill to create a hole in the plaster where you want to place the anchor. Insert the anchor into the hole and gently tap it in with a hammer until it is flush with the wall. Finally, screw in the screw or hook into the anchor to securely attach it to the wall.