yes, so long as they are the same type (mine are H7 Xenon)
dose Mazda 6 tamura have xenon headlight bulbs 07 plate
You can bulbs like that from Halfords or Euro car parts in
there is no fuse i beleave just for the right headlight, i presume your right headlight is not working, do you have xenon or halogen bulbs, if you have xenon then the most likely cause is headlight xenon control modules, if the module is the cause i would sudjest replacing both headlight modules, and the front right xenon bulb. good luck.
To change the headlight bulbs on a Volvo 740 GL, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly. Remove the retaining clips or screws securing the headlight, then carefully pull the assembly forward. Disconnect the old bulb from the socket, replace it with the new bulb, and reassemble by securing the headlight back into place. Always handle bulbs with gloves to avoid oil from your skin affecting their lifespan.
Headlamp shall be white to amber
I think halo has 2 separate bulbs for low and high beams. While Bi-xenon has both beams in one bulb. OEM headlights work with Bi-xenon bulbs.
Order replace done
To replace a headlight on a 2002 Honda Civic first prop the hood open. Locate the headlight housing inside the engine compartment. Find the bulbs and remove them. Install the new bulbs.
The prices vary, but you can get a 2 pack of halogen bulbs for between $15 and $20. Xenon bulbs are expensive, at over $120 each.Or you can buy a used one for 50$ from the junkyard.
how to replace bulbs on a 2009 mitsubishi eclipse
The headlight assembly (aka the headlight bucket) is removable by releasing the lock tabs behind the assembly. Once the assembly is wiggled out in the open you can easily replace the bulbs.
To install xenon bulbs, first, ensure the vehicle is turned off and the headlights are cool. Remove the headlight assembly or access the bulb socket from the back of the headlight housing. Carefully disconnect the old bulb and connect the new xenon bulb, avoiding touching the glass with your fingers. Finally, secure the bulb in place, reassemble any components, and test the headlights to ensure proper function.