You can use any SAE certified manual transmission fluid in your 1996 Ford manual transmission. Make sure you use manual transmission fluid and not automatic transmission fluid.
If you mean, do they make the Chevy Colorado with a manual transmission, the answer is yes; the standard transmission in a base Colorado is a 5-speed manual.
You can use any SAE certified transmission fluid in your 1998 Ford escort manual transmission. Make sure the transmission fluid is for your manual transmission and not an automatic transmission.
NO.....any 96-99 Taurus SHO with a manual transmission was a conversion. There were no factory manual transmission cars.
no
nope. the last 4runners with the manual transmission were 3rd generation 4runners
Fixing a transmission bearing noise often times requires rebuilding the transmission. If you are mechanically inclined it is not hard to do. Make sure to purchase a transmission repair manual as it will make it easier.
The automatic transmission in a 1982 Mercedes 240 D was made by Rockwell international. The model of the automatic transmission was either a 392 or a 692 six speed.
yes, you can make almost any vehicle with an automatic transmission manual, but it is usually not worth the expense, you have to get your hands on the manual transmission then you have to modify the floor for the shifter and put in a clutch & linkage all in all not usually worth it
On a 2001 Mercedes-Benz ML320, the transmission dipstick is located near the back of the engine bay, typically on the passenger side. To access it, you may need to remove a cover or other components, as the dipstick is often positioned in a way that can make it less visible. It's important to check the owner's manual for specific guidance on locating and checking the transmission fluid.
no
To convert a 1988 Suzuki Alto from automatic to manual transmission, you'll need to replace the automatic transmission with a compatible manual gearbox. This involves removing the automatic transmission, modifying or replacing the transmission mounts, and installing the manual transmission. You'll also need to change the clutch pedal assembly, install a clutch master and slave cylinder, and ensure the drive shaft is compatible. Finally, make appropriate adjustments to the wiring and any necessary components to accommodate the manual transmission system.