0
Found metal shavings in distributor in '71 VW Bus does anyone know what that might be?
The rotor was probably not installed correctly, and it rubbed against the cap. The rotor should be pressed completely down. Make sure the cap is seated correctly on the distributor and clipped on securely, as it could cause the rubbing if it is misaligned.
Just put a 009 distributor in if the weights are coming apart,or the bushings have too much play,can buy for under 100 dollars!
What else can I help you with?
Why have metal shavings in distributor on Nissan Quest?
you need to look for wear marks in distrubuter and find out where the shavings come from do not keep driving till it is fixed shavings can fall down the guts of distributer and do more damage
There is metal shavings in your oil?
Yes!!! Oils contains a metal shavings but it is not harmful...
How do you sepeerate metal shavings and pepper?
One way to separate metal shavings and pepper is to use a magnet to attract the metal shavings, leaving the pepper behind. Another method is to use a sieve or strainer to filter out the metal shavings while allowing the pepper to pass through.
What causes a 96 mercury villager SE miss out after getting hot?
It is the distributor. If you remove the distributor cap, rotor and cover plate, you will find metal shavings around the shaft and bearings. You can remove these shavings with compressed air and a pencil magnet. Spray a small amount of white lithium grease around the bearings and reassemble.
Why is there metal shavings sable transmission?
Why is there metal shavings in my 220K kilo Honda accord tranny? Do i repair or replace it?
Is it true that metal shavings are good for automatic transmissions?
Metal shavings are never good inside any transmission.
Which can opener has no metal shavings?
A smooth-edge can opener is designed to cut along the lid's seam without leaving sharp edges or metal shavings. These can openers have a safer design that minimizes the risk of metal shavings contaminating food.
Is metal shavings a chemical contamination?
False
What are metal shavings called and how are they typically produced in industrial processes?
Metal shavings are also known as metal filings or swarf. They are typically produced in industrial processes through the cutting, grinding, or machining of metal materials.
What is the presence of metal shavings in a can of tomatoes considered?
Chemical
Can a human body safly ingest metal shavings?
No
What type of hazard Are staples and metal shavings?
Medical
