answersLogoWhite

0

Make sure you have all the equipment i.e. spark plug socket and the correct spark plugs otherwise you will damage the plug screws if you force a large wrong size spark plug.

First clean all the area around the plugs and blow out any dust or rust as it may fall in the engine. Do one plug at a time, or if you remove all of them make sure you mark the wires so you don't mix the firing order by putting the wrong wire in the wrong plug.

Pull the wire from the plug and remove the plug with a plug socket. Put some grease or Mobil oil on the groves of the new plug and gently screw it in with hand and then tighten it gently with the plug socket, do not over tighten it. Push back the plug wire and once you have done all plugs restart the engine.

User Avatar

Wiki User

13y ago

What else can I help you with?