To adjust the handbrake on a Citroën Saxo, start by ensuring the vehicle is on a flat surface and securely supported. Locate the adjustment nut under the center console, usually accessible by removing the plastic cover. Turn the nut clockwise to tighten the handbrake or counterclockwise to loosen it, aiming for about 5-7 clicks of resistance when pulling the lever. After adjusting, test the handbrake to confirm it's holding the vehicle securely.
ajust break shoes on back wheels
To adjust the handbrake on a Citroën Saxo, first, ensure the car is on a level surface and the wheels are chocked. Locate the handbrake adjustment nut under the center console or between the front seats; it usually has a cover that can be removed. Turn the nut clockwise to tighten the handbrake and counterclockwise to loosen it, ensuring that the handbrake holds the vehicle securely without excessive force. Finally, test the handbrake to confirm it engages correctly before replacing any covers.
jack rear of car use jacks,with the hand brake off pump food brake 2-3 times,with food brake pressed down pull hand brake up in a normal manner 3-4 times ,this should reset the handbrake.
Citroen Saxo is drived from french.
change hand brake cable citreon relay
top speed of a Citroen saxo 1,1
Easy, the adjusting nut is located directly next to the handbrake lever. You simply have to remove the cover to access it. Regards Gary Tetlow
were are spark plugs in citroen saxo
Change password for the start engine for citroen saxo?
what about it?
On a Saxo, the handbrake can sometimes come loose and needs to be tightened. To do so, first turn the engine on and place your foot on the brake. Push in the handbrake button and then pull up on the handbrake until tension is felt. Repeat as needed.
To adjust the handbrake on a Citroën Xantia, first, ensure the car is on a flat surface and securely lift it using a jack. Remove the rear wheel and access the brake mechanism. Adjust the handbrake cable tension by turning the adjusting nut located near the rear of the handbrake lever until the desired tension is achieved, making sure the handbrake holds the car when engaged. Finally, test the handbrake by lowering the car and ensuring it holds securely on a slope.