The buttons on the left side of the steering wheel navigate the menu's for the display functions. I think it is the settings menu that will get you to the clock. Then all you have to do is hit buttons until the right setting is established. Why do they make life so complicated???
The cost of the actual bulb in the instrument panel for a Mercedes ml320 averages $40.00. A certified technician can charge between $100.00 and $200.00 to change the bulb.
I located the instrument panel illumination lights on my 1990 Nissan D21 Pick-up by removing the clear plastic panel that protects the gauges and pulling the instrument panel forward. To do this, screws must be removed from the dash panel located around the instrument panel. There are also screws securing the clock adjustment knob and the glass/instrument panel itself. The bulbs twist into the backside of the instrument panel. There are several of them. I located the instrument panel illumination lights on my 1990 Nissan D21 Pick-up by removing the clear plastic panel that protects the gauges and pulling the instrument panel forward. To do this, screws must be removed from the dash panel located around the instrument panel. There are also screws securing the clock adjustment knob and the glass/instrument panel itself. The bulbs twist into the backside of the instrument panel. There are several of them.
This is cluster failure! The instrument cluster will need to be replaced this is usually done by certified Mercedes repair facility
Follow the instructions on Youtube.
To set the analog clock, located at the top center of the instrument panel, press and hold the button (located just to the left of the clock on the silver bezel, at the "nine" o'clock position) in until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.
Begin by removing the instrument panel cover from your Mercedes-Benz E430. Push the lightbulb in and turn it at the same time. The instrument panel lightbulb will come out. Reverse the process to install your new dashboard light bulb.
To set the clock on your Samsung electric range, press the "Clock" button on the control panel. Use the "" and "-" buttons to adjust the time. Press "Clock" again to save the setting.
It is behind the instrument panel - you must remove the steering wheel, then the instrument cluster to get to it
You could have an exterior light out.
you take apart the dash and get to the instrument panel. then you take the instrument panel out and on the back of the panel you'll will see the lights
Remove the instrument panel cover. Remove the instrument panel retaining screws. Remove the wiring harness from the gauges. The instrument panel will come out.
To adjust the clock on a GV 650 EFI Hyosung motorcycle, start by turning the ignition key to the "ON" position without starting the engine. Locate the "Mode" button on the instrument panel; press and hold it until the hour display starts blinking. Use the "Set" button to adjust the hours, and press the "Mode" button again to switch to minutes, where you can make further adjustments. Once finished, press "Mode" to exit and save your settings.