The cigarette lighter fuse can be found in the fuse box. The cigarette lighter fuse will be in the second column, fourth from the bottom.
its the fuse
The headlight bulb on a Volkswagen Polo can be removed by grabbing the back of the headlight bald and pushing forward and turning at the same time. The bulb will come out. Reverse the process to install the new headlight bulb.
see:How_Change_VW_Polo_1999_Number_plate_light
To change the headlight bulb on a 2003 VW Polo you must first remove the rubber cover from the back of the bulb. Pull off the connector and loosen the 2 torque screws to allow the black plastic locking to turn. Turn the locking ring counter-clockwise to remove and replace the bulb.
You don't.The unit is integrated and the whole thing has to be replaced.Sneaky VW
To change the reading light bulb in a VW Polo, first, ensure that the car is turned off and the keys are removed. Gently pry off the light cover using a flat tool or your fingers, being careful not to damage it. Remove the old bulb by twisting it counterclockwise and replace it with a new bulb, making sure it’s securely in place. Finally, snap the cover back on and test the light to ensure it works.
Check for a blown fuse.
light bulb is about to go
The VW polo has headlight bulbs. If the headlights are not working, it may be a bulb has burnt out.
To change the brake light bulbs on a 2008 VW Polo 1.2, first, open the boot and locate the tail light assembly on the side where the bulb needs replacement. Remove the access cover or screws to detach the tail light assembly. Once exposed, twist the bulb holder counterclockwise to release it, replace the old bulb with a new one, and reassemble the light by reversing the steps. Finally, test the brake light to ensure it’s working correctly.
If you open the flip up compartment opposite the hand brake, there should be a cigarette lighter socket in there. Next to it is a little black tray, you should be able to pull the tray out and it will be there in pink. Gamertag on xbox live "Amar Rambo"