Support the car on axel stands under rear jacking points then undo shock absorber and then the axel should fall down lower using a jack to support it making the spring loose and should be able to remove and replace.
To change a rear coil spring on a Vectra C, first ensure the vehicle is securely lifted and supported on jack stands. Remove the rear wheel and then detach the shock absorber and any necessary suspension components to access the spring. Use a spring compressor to safely compress the coil spring before removing it from the spring seat. Install the new spring by reversing the process, ensuring everything is securely reattached before lowering the vehicle.
huu?
how to change broken spring on a 2003 buick renezvous left rear
how do you change the rear license plate light on a 1999 Buick Regal
THATS WHAT SHE SAID!!!!! LAWL!!!! HAKX!!!! =D
to change the shocks on the rear of the jaguar XJ-6, you need a spring compressor. compress the spring, loosen the top mount plate from under side of car. drop the axle as far as you can. undo the top mounting, then the lower. the car will have to be raised far enough to allow the shock to be removed and the replacement installed.
Changing the rear brake pads on a Vauxhall Vectra is similar to another device and can be done by hand or by a mechanic. The original brake pads need to be removed but not any of the brake wires. Then new pads should be put on.
A Vauxhall Vectra rear suspension diagram is available through their service manual. Online Vectra service manuals are also available to be purchased through several websites.
Undo the screws around the number plate, take the number plate off then put the new number plate on.
how do i change rear brake pads on 53 plate Picasso hdi
see:How_Change_VW_Polo_1999_Number_plate_light
how to change the license plate bulb onLook at the rear plate , then get on the ground so you can look up to the underside of the bumper, where the plate is. There are two Phillips screws the hold your plate light, remove both, pull down gently on the light, then turn it co you can see the rear and with both Hans turn the socket and pull, there you will find the bulb. change it and do the reverse to install.