look to rear of engine u will see a square peg a 1/2 inch bar is required pulled towards the front of the engine and a 3mm pin put into the eyelets that align as you pull it forwards *note get the updated belt that misses out the centre idler pulley as they fail regularly
To change the water pump on a 1998 Saab 900s Turbo, first, disconnect the battery and drain the coolant. Remove the serpentine belt and any components obstructing access to the water pump, such as the timing cover. Once exposed, unbolt the old water pump, clean the mating surface, and install the new pump with a new gasket. Reassemble everything in reverse order, refill the coolant, and check for leaks.
To replace the idler pulley on a 1996 Saab 900S, first, ensure the engine is off and cool. Remove the serpentine belt by loosening the tensioner pulley with a wrench. Then, unbolt the idler pulley from its bracket and replace it with the new pulley, ensuring it is tightened securely. Finally, reattach the serpentine belt, making sure it's properly aligned on all pulleys before starting the engine.
$32000
1,174kg / 2,583 lbs
Like all cars, Saab 900s have brakes. The calipers are part of the braking system. The braking system was basically the same on all Saab 99s and 900s from 1975 to 1987. What's the question?
highbeams wont go off on my saab
where is ignt.mod. location
I really don't know!
serpentine belt rought 2001 Saab 9.5
It is Attached to the oil filler cap
unscrew bolts and take out.
4.25 quarts (4 liters).