You can change the fuel pump in Renault clio 1.2 by opening the fuel pump gauge and inserting the fuel pump there. This is a simple process relatively speaking.
If this is the same as my 2000 323 CI then all you need to do push in the menu selector on the turn signal switch until you get the clock on the dash. Then you twist the dial on the right side of the gauge display on way or the other to change the time. Hope this helps.
fuel gauge not working
You have to pull the gauge assy out and the lights are mounted from the rear. Run1
All you have to do is HOLD the knob under the RPM gauge left for hour and right for minute, not totally true this process doesn't change the am or pm feature of the clock.
It gauges and distributes the power required to get the correct reading from your oil gauge display.
both are non sentient, inanimate objects
A transmitter is a device that converts a signal from a sensing device into a standardized output signal, typically a current or voltage signal. A gauge, on the other hand, is a device used to measure and display values such as pressure, temperature, or level. Transmitters provide a means to transmit the measured value to a monitoring/control system, while gauges simply display the measured value locally.
Fuel gauge problems are usually the fault of the fuel gauge sending unit in the fuel tank, just saying.
Gives a reading of what the pressure in the system is.
The symbol used on the Renault Scenic for a problem with the radiator is a thermometer. There should also be a temperature gauge on the dash that shows the current temperature of the radiator fluid.
on the left side of the gauge panel underneath the speedo there should be a small skinny black knob...turn to the right a little bit and hold it and the minutes should change. do the same to the left for hours