0
Jack the car up and rest it on axle stands. Remove the wheels. Doing one brake at a time, take the spring that is holding the outside brake pad off with a flat screwdriver. There are 4 Allen bolts that need to be removed. 2 x 7mm bolts and 2 x 10mm bolts. These are located on the back side of the calliper. The 7mm bolts are hidden behind plastic caps and the 10mm bolts are exposed. Prise off the plastic caps with a flat screwdriver and undo the 7mm bolts. You will need a ratchet with an extension bar to do this. Once you have removed the 7mm bolts pull the top part of the calliper away and rest it on something, it should take one pad with it. Now undo the 2 10mm bolts, again with a ratchet and extension bar to remove carrier with the other brake pad. To replace the brake pads undo the bleed nipple and use a G clamp to push the pistons in. Now do the same as above but in reverse and then do it all again on the other side of the car. IMPORTANT Make sure you bleed the brakes after they are back together. Good luck.
What else can I help you with?
How do you remove the front bumper of a Vauxhall vectra 2000?
how do i change the front bumper on my 1999 vauxhall vetra
How do you change 1999 ford explorer front brake rotors?
remove the brake caliper and the rotors come right off
How to change front rotors on a 1999 windstar?
You remove the wheels, remove the brake caliper and the rotor is then free .
How do you change the alternator on a 1999 2.5 v6 vectra?
Answer this question...pop driveshaft out bud
How do you change the front brakes and the back brakes on a 1999 Alero Oldsmobile?
First of all, Do you have any specialty brake tools? Ben
Change a front signal on a 1999 Corvette?
how do u change front signal lights for corvette 1999
What size are the front brake caliper bolts 1999 xj?
aa
1999 Chevy Tahoe front brake?
Need to know what the question is.
How do you change front breaks o A 1999 Cadillac sts?
To change the front brakes on a 1999 Cadillac STS, start by safely lifting the vehicle and removing the front wheels. Next, remove the caliper bolts and slide the caliper off the brake rotor, then remove the old brake pads. Install the new pads, ensuring they are properly seated, and reattach the caliper. Finally, replace the wheel, lower the vehicle, and pump the brake pedal to ensure the pads seat correctly before driving.
How do you replace rear brake drums for 1999 Chevy Venture?
i was wondering how to change rear brake drums for 1999 Chevy venture
Can you change front of GMC Savana Van year 1999 to 2005?
Can I change front of GMC Savana Van from 1999 year to 2005
How do you fix the front brake line on a 1999 Chevy blazer?
Replace and bleed line
