front or rear?
Answer : unscrew the signal lens and remove the signal bulb and replace with 1157 bulb reverse process
To change the rear blinker on a 2006 Ford Freestyle, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips holding the assembly in place, then gently pull it out. Twist the socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Ensure the bulb is securely in place before testing the blinker.
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
Bulb is blown. Replace bulb.
what do you do if wingnut stuck when replacing a rear indicator bulb on a vw beetle
It would depend on what model of Buick you are referring to.
remove rear trim assembly by turning the little plastic wingnuts; turn the harness plugs counterclockwise and they will come out 3157 is correct bulb I believe.
Broken bulb, or the wiring is shot.
You do this from inside the trunk. Pull the carpet away from the back of the tail light housing. You should see the rear of the bulb holders. Unscrew the one with the dead bulb and pull it straight out. Replace the burned out bulb. Screw the bulb holder back into the housing. Re-seat the carpet. You're done!
u dont
try accessing it from the inside of the trunk, if not that there should be some screws holding the fixture in place, undo those to remove it and the bulb will be right there