this should help: http://www.matthewsvolvosite.com/forums/viewtopic.php?f=9&t=14819
Begin by removing the wiring harness from the back of 2004 Volvo headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
you have to remove the headlight assembly 3little bolts
the glass cover on the headlight is not servicable, they are glued during assembly. you have to replace the entire headlight globe or headlight assembly.
I know the first part is to turn the white flange that holds the assembly in place, but after that I am stumped.
open hood and remove the three bolts holding the headlight assembly. Pull assembly forward and unscrew the cap at the back of the assembly. Remove the plug and open the clamp. replace bulb, clamp and wires. Put back together.
To replace the daytime running light on a 2004 Suburban, you will have to first remove the two metal pins that can be found on top of the headlight. The headlight assembly can be removed next. Pull out the plugs that are connected to the headlight assembly. Replace the bulbs and then reconnect the assembly.
Under the passenger side headlight assembly, you have to remove the entire assembly to get to it.
The bulb plug is held into the back of the headlight assembly and can be removed by rotating the bulb plug assembly roughly 90 degrees counter clock-wise and pulling the bulb plug assembly out.It is a tight fit to get your hands in, but try from the top with the hood open.
how remove headligth lenses for 2004 Mazda mpv
== == That is how you change the actual headlight but the question is how to change a fuse.
To remove the headlight on a 2004 Cadillac CTS, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly, then remove the two screws securing it in place. After unscrewing, gently pull the headlight assembly forward and disconnect the electrical connector by pressing the tab and pulling it off. Finally, you can replace the headlight bulb or the entire assembly as needed.