0
Well let me say your going to have to drop the steering wheel to get to the switch. The actual switch is on top of the steering column. There is a steel rod that comes from your ignition down to it. Unhook that. Then unbolt the switch and replace. One thing I forgot to mention. When you drop the steering wheel, don't take it out of the fire wall. Just unbolt the cradel that holds it in place and let it rest on the seat. If your steering wheel doesn't come down far enough, put something on the seat to rest it on. GOOD LUCK! Ethan Tegtmeier.15 year old. I had to drop mine to get to my switch on my truck.
What else can I help you with?
Location of fuel shut off switch in 1985 F250 Truck?
There isn't one!
Where is the fuel intertia switch on a 1985 Ford Bronco?
its located on the passager side of the truck under the dash
How do you change the ignition switch in a 1985 Chevy Cavalier?
i have 85 cavalier how you get key cycliner out
Will a 1990 Nissan 5 speed pick up transmission fit a 1985 truck?
no 84 and 85 change out.
How do you change the ignition switch in a 1985 Monte Carlo?
You're going to have to unbolt the steering column and drop it down. The ignition switch will be on the top of the column along with your high beam switch. Unbolt the switch then unplug it.
Vacuum diagram for a 1985 Chevy truck?
where can i find a vaccum diagram for a 1985 Chevy truck with a 350 small block
Will the body parts from a 1985 Scottsdale truck fit on a 1989 Cheyenne truck?
No
How to drill out ignition switch on 1985 Ford F-150?
How to drill out ignition switch on 1985 ford f150?
Would a bad voltage regulator on a 1985 Dodge Ram pick up truck cause the battery to drain?
Yes possible. If switch does not open on engine shut down battery will drain If switch does not close on start up battery will not charge
How do you change the brake light switch on 1985 Chevrolet Impala?
It is mounted on a bracket under the dash at the brake pedal. From there it is self explanatory.
How to change ignition switch in 1985 Jeep CJ 7?
To change the ignition switch in a 1985 Jeep CJ-7, first disconnect the negative battery terminal to ensure safety. Remove the steering column trim by taking out the screws, then detach the ignition switch from the steering column by unfastening the retaining screws. Disconnect the wiring harness from the old switch and replace it with the new one, securing it in place. Finally, reassemble the trim, reconnect the battery, and test the ignition switch to ensure it functions correctly.
Why your wipers turn on when you use the turn signal in 1985 GMC Jimmy?
The turn signal/wiper switch is most likely bad and will need replacment. how do you change the switch is it necessary to remove steering wheel?
