it is inside the front right bumper by the marker light
To change the right front marker light on a Lexus RX300, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove the screws or clips securing it. Carefully pull the assembly forward to access the marker light socket, twist it counterclockwise to remove, and then replace the old bulb with a new one. Reassemble everything by reversing the steps, ensuring all components are securely fastened.
To replace the front right marker light on a Mercedes C300, first, open the hood and locate the headlight assembly. Remove the cover or housing protecting the marker light by unscrewing any clips or screws. Gently twist the marker light bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it is securely in place. Finally, reassemble the housing and test the new marker light.
on a 2004 Nissan frontier changing the small marker light on the driverside (clear one)?
Open the hood, look for the tab right above the headlight housing that says pull up tab to service headlight, under that tab you will see the headlight adjustment screws. Look for a star screw that is right next to the side marker light, remove that screw which is about 4in long and the marker should come out front first.
Right next to the drivers side front marker light, in the headlight area.
Location of horn on 97 Chevy cavalierit is inside the front right bumper by the marker light
To replace the right front marker light on a 1998 Isuzu Trooper, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the marker light assembly; then, remove the screws or clips holding the assembly in place. Carefully pull the assembly out, disconnect the wiring harness, and replace the old bulb with a new one. Reconnect the wiring, secure the assembly back in place, and test the new light to ensure it works.
You will need a Phillips screw driver. There's one screw at the end of the marker light. Take that screw out and the marker light will slide right out-of-place for you. Hope this helps, 1ATony
Probably just a burned out bulb in the front one. Those bulbs have 2 elements so the marker light will still work but the blinker wont.
6
6