Leave to an expert, its a lot of work and basically the same process for doing the timing belt. Needs a few special tools that the average household won't have.
How do I change a water pump on 1998 dodge ram v10 2500. I need a picture to
Remove the water return line from your 1998 Chevrolet pickup truck water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
The average time it takes to change the water pump on a 1998 Dodge Avenger is six to ten hours.
behind the timing cover you should change the timing belt when you change water pump.
remove front of engine and remove timing belt It runs the pump
The water pump is driven by timing belt, so, replace the timing belt while you are replacing water pump, because you have to take off timing belt to get to water pump.
You do not need to, but it's highly recommended. If water pump fails after you change the belt, you will have to do the same work as before to replace the pump.
how to change a fuel pump in a 1998 Chevy Corvette
Where is the water pump???
the water pump on the 4.3L vortec is easy. there are four bolt holding the water pump in place. these bolt hold your fan clutch also. the water pump and fan system.are built as one. remove these bolts and you are ready to change your water pump.
Remove the belt from your 1998 Chevy 1500 water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
To change the water pump on a 1998 Saab 900s Turbo, first, disconnect the battery and drain the coolant. Remove the serpentine belt and any components obstructing access to the water pump, such as the timing cover. Once exposed, unbolt the old water pump, clean the mating surface, and install the new pump with a new gasket. Reassemble everything in reverse order, refill the coolant, and check for leaks.