it's on the top of the air intake manifold just under the black pipe coming from the intercooler , the egr has a 5 wire connector going into it and has 3 bolts holding it on , remove the intercooler pipe and u will see it directly under it
To disconnect a PVC pipe, you can use a PVC pipe cutter or a hacksaw to cut through the pipe. Be sure to wear safety goggles and gloves, and make sure the pipe is empty and dry before cutting.
You disconnect the horizontal pipe from the vertical well pipe at the wellhead, and pull up the vertical pipe.
From the Dodge forums. Drain the coolant, disconnect the surge tank to heater pipe line, and the heater core to heater pipe line, remove the drivers side engine mount, and the starter, and unbolt the heater pipe from the engine-transmission bolt. Remove the clamp from the short hose at the thermostat housing, and pull the pipe out.
Disconnect the pipe and drop a weighted string down the pipe. You can't tell by looking.
Vent, return circulation
the car is a Renault espace diesel
Front ¼" Pipe Cooler feed/out Rear ¼" Pipe Return/in
For heating and cooling, one pipe is a supply line and one is a return line.
The alternator oil pipe on combo van leaking does feed the vacuum and the return pipe.
After you use the return pipe you will warp to the level select area just enter one of the doors and it will bring you to the next level
In a(n) ____________________ fuel oil supply system, one pipe is the supply and the other acts as the return.