fan belt keeps snapping ,teeth stripped of
The number of the fan fuse is 2
To replace the fan belt on a 1997 Vauxhall Astra 1.7 diesel, first, ensure the engine is off and cool. Loosen the tensioner pulley by turning the appropriate bolt or using a wrench to relieve tension, then remove the old belt from the pulleys. Install the new belt by routing it according to the belt diagram, ensuring it sits properly on all pulleys. Finally, adjust the tensioner to apply adequate tension to the new belt before securing everything back in place.
What series/ year? There are many variations.
Which engine?
Behind the glove box. Remove glove box and you should have easy access.
if u changed thermostat it has to be reset so fan can turn on correctly
How do you change a fanbelt of a opel astra 200 ie.
A full detailed explanation can be found in a vauxhall corsa haynes service manual
To tighten the fan belt on a Vauxhall Vectra, locate the alternator, which typically has an adjustable mounting bracket. Loosen the securing bolts on the alternator to allow for movement. Then, adjust the position of the alternator to increase tension on the belt before re-tightening the mounting bolts. Check the belt tension by pressing down on it; it should have a slight give but not be overly loose.
Depends what year it is..2000 up have electronic power steering
To change the fan belt on a Vauxhall Frontera 3.2, first ensure the engine is off and cool. Locate the tensioner pulley and use a wrench to relieve tension on the belt. Remove the old belt, noting its routing for installation of the new one. Finally, place the new belt according to the routing diagram, apply tension using the tensioner, and double-check the alignment before starting the engine.
Not unusual for these to get just over the 100 at idle. As long as the radiator fan cuts in there not normally a reason to worry