To install a throttle pedal position sensor on a 2001 Mercedes S500, first disconnect the negative battery terminal to ensure safety. Remove the panel covering the accelerator pedal and locate the old sensor, then disconnect the electrical connector and unscrew the sensor from its mount. Install the new sensor by securing it in place, reconnecting the electrical connector, and reassembling any panels removed. Finally, reconnect the battery and check for proper operation.
Disconnect the battery. On the side of the throttle body, disconnect the wiring from the position sensor. Remove the bolts from the sensor, and lift the sensor off, reverse the procedure to install the new one.
How to install tps
remove and reinstall
The 1998 Oldsmobile Intrigue throttle position sensor is held in place with two retaining screws. Remove the retaining screws and the wiring harness. Reverse the process to install the new throttle position sensor.
The throttle position sensor is in the throttle body.
The function of a throttle position sensor is to monitor the position of the throttle in an internal combustion engine.
The throttle position sensor is located on the throttle body at the end of the throttle shaft.
The throttle position sensor is located on the throttle plate.
The throttle position sensor is on the throttle body, opposite of where the cables attach.
The throttle position sensor is on the throttle body on the opposite side of the cables.
Generally speaking the throttle position sensor is on the throttle body.
The throttle position sensor is on the throttle body.