There should be a black support rod laying flat in front of the radiator. It pivots on the right (as you face the engine). Position it upright and into a hole in hood.
UNLOCK THE HOOD AT THE HINGES AND FLIP THE HOOD ALL THE WAY UP, THEN THE SPRINGS WILL COME RIGHT OUT
Yes
If you are standing in front of the car, facing the windshield, with the hood up, it is in the left hand rear corner of the hood compartment.
Under hood on left side under black box with 2 snap holders in the front of box unsnap then pick up box top. Gene Terenzio Sr. 2000 ML 320 owner
It doesn't have any. The hood has hydraulic lifts on both side that should, in theory, keep the hood up.
Under the hood on the passenger side near the firewall there is a round plastig plug that has a plastic teather to keep from being lost. Pick up the plug and the diagnostic port is underneath.
You can easily replace this emblem. Lift up the hood and unscrew the bolt underneath the emblem. Stick the new emblem on the hood and screw the bolt back on.
mine stays up with hydraulics it doesnt require anything to prop it up
My 220d is a 1969 and there is NO way to screw it up, red to + and Black to -. The battery is as big as 12 pack of soda.
should be up and under the drivers side dash panel towards the left side.
There is a red handle under that steering wheel that you pull to pop that hood. On the front grill of the car a grey tab pops out, pull it out and pull the hood up at the same time. Once done, close hood and grey tab is no longer visible. Hope this helps =)
soz i gotta a s class (latest) and i don't know where the hood release is but go onto their site (http://www3.mercedes-benz.com/mbcom_v4/xx/en.html) and follow the promptsbut make sure that the HTTP does come up with http://www3.mercedes-benz.com/mbcom_v4/xx/-something other than en.htmlbecause then you will get it in a different language