To manually move the front seat on a Mercedes CLK 320, locate the lever or knob typically found on the side of the seat. Pull or rotate this lever to slide the seat forward or backward. If the seat is equipped with a manual recline feature, you can also adjust the backrest using a separate lever located on the side. Ensure the seat is in a comfortable position before securing it again.
No, the seats in a 98 Cadillac Deville are all electronic so they cannot move manually. You will have to get the electrical components fixed before the seat will move.
There is a lever under the seat at the front edge.
NO you need to make sure you have power to the seat
To manually move the driver's seat on a Mercedes-Benz C320, locate the manual adjustment lever or knob typically found on the side of the seat. Pull the lever or turn the knob to slide the seat forward or backward. For adjusting the seat height or backrest angle, you may need to use separate levers or knobs, depending on the seat's configuration. Always ensure the seat is locked in place after making adjustments for safety.
Move the seat all the way back. Remove the two bolts in front of the base of the seat. Move the seat all the way forward. Remove both bolts at the base of the rear. Wiggle the seat until it comes loose and look for wires underneath that may go to the seat motor and seat warmers.
Check to see if anything restricting movementCheck to see if cable disconnected or brokenSee if you can manually move cable to lower seat
Move the seats all the way back, unbolt the two bolts holding the front of the frame to the floor. Move the seat all the way forward, and remove the two bolts in the back. Tilt the seat back, and unclip the wires underneath the seat.
Remove the bolts and disconnect the wires and pull the seat out
under the right front seat
there are 4 bolts on the bottom of seat to unbolt and a power connection for power seats that you disconnect.
Under front passanger seat.
Move it to the front seat!