answersLogoWhite

0

Depends on what year the xj is and if your talking outside rear view or inside. I just replaced my inside rear view. It's auto-dimming. If it's the inside and auto-dimming, there is a cap on the top of the mount. Carefully pry back near the top and this peice should come off easily. You should then be able to push the mirror post straight down to release it from the windshield mount. Then you'll have to loosen the overhead console. Do this by using a straight blade screw driver to turn the plastic keeper screw, that is is visible with the sunglass holder open, 90 degrees counter-clockwise. Pull gently, slightly downward and toward the rear of the car. The overhead console is held in the front by two metal tabs so there are no more screws. That will free the overhead console and you can see the wiring harness for the mirror toward the front of where the console was. The connector has a tab so very carefully lift the tab and pull apart the harness. Re-attach in reverse order and you'll be seeing things in the rear of the car again! Hopefully not flashing lights!

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove the rear view mirror from a 1985 jaguar xj6?

Pull it off! Seriously.... Its on with glue.


How do you write rear view mirror?

Rear view mirror.


Where is the head light sensor located on a 2002 jaguar x-type?

Check the back of your rear view mirror.


When was Rear View Mirror created?

Rear View Mirror was created in 2011.


When was Rear-view mirror created?

Rear-view mirror was created in 1911.


How do you mount outside rear view mirror on a 1966 mustang?

there should be a mounting bracket that screws onto the door and then the mirror screws to the bracket.


How do you replace the rear view mirror on a 2002 Jaguar XK8?

Special adhesive needed available at auto parts or Wal-Mart


How do you remove a rear view mirror on a 2001 Mitsubishi Lancer?

how do you seperate the the centre mirrow head from the screen mount


How do a tighten a rear view mirror for avalanche?

To tighten a rear view mirror on a Chevy Avalanche, you may need to adjust the tension screw found on the mirror attachment point. Use a screwdriver to tighten the screw and secure the mirror in place. If this does not work, you may need to replace the mirror mount or adhesive pad for a more secure fit.


How do you remove the interior rear view mirror of Vauxhall - Opel Omega B?

You need the following tools: Rear-view mirror, installation kit, screwdriver, a glass cleaner, razor blade, and crayon. One is required to wear the safety gear gloves and glasses. Mark the old mirror mount using the crayon and remove it using a razor then mount the new mirror on the same position.


Can you drive without side view mirror?

The law says that: new passenger cars must have two rear-view mirrors (one outside, on the right-hand side, and an inside rear-view mirror) new light goods vehicles must have an outside right-hand side rear-view mirror and either an inside rear-view mirror or an outside left-hand side rear-view mirror new mopeds and motorcycles must have one rear-view mirror all other motor vehicles (except pedal cycles) not covered above need to have at least one rear-view mirror.


What is orvm in cars?

Outside Rear View Mirror..Manually operated r conventional..Modern cars has electrically adjustable ORVM's....