on our 2001 there is a cruise control button on dash push it then use controls rite side of steering wheel.
How to operate cruise control in 2000 range rover?
With your finger.
If the engine on the Santa Fe is missing, then the cruise control will not operate properly. The engine will have to run properly before the cruise can be fixed.
When you get to speed you want to keep, press the button to activate cruise control. You will on the dash light showing that cruise control was activated. After that pull the cruise control joystick down to set the speed. If you pull toward you it resets the current speed.
In a 1991 Corvette, the fuses that operate the cruise control system are typically located in the fuse panel situated under the dashboard on the driver's side. You can find the fuse panel cover on the side of the dash; once removed, refer to the diagram on the cover or the owner's manual to identify the specific fuse for the cruise control. It's important to check both the fuse and the wiring to ensure proper functioning of the cruise control system.
Buy one and follow the installation manual. If that is not what you want don't do it by your self.
Check the cruise control for the Prelude first. Then check the cruise relay, any linkages, and the vacuum lines. If these are ok, then run a computer code check to see if any codes show up. A code issue could cause the cruise to not operate properly.
Cruise control is an accessory.
It is possible to convert a car without cruise control to have cruise control. Many auto parts stores sell kits which will install cruise control in a vehicle.
check the fueses check fueses
There are several ways to fix the cruise control on your Mercedes-Benz depending on the problem with the cruise control. Make sure the fuse for the cruise control is not blown.
2004 sebring convertable cruise control not working - what to do?