0
Most often miss understood is programming. Programming the button REMOTE portion of the key is simple and referred to as matching. 1999.5 to 2006 with remote suffix with any of these letters, F, E, S, T, AM, DC
You do need 2 keys. You must be able to lock the drivers door and have the red led alarm light next to the lock button blink. If it does not blink, the alarm does not know the door is closed and will not go into matching mode.
Put one key in the ignition switch, turn on, do not start engine. Close the door, use 2nd key, turn door lock and hold in lock position for 10 seconds. Release key to neutral position.
Press a button on the remote, within 2 seconds press the same button again, the turn signal lights will flash, this indicates your remote matches the car system and is now recognized. Unlock door remove key from ignition. Remote should now work
2005 to 2007 Volkswagens using the H P or Q remote, same procedure, but only unlock door with key and don't hold it, then press button once
www.haakey.com
What else can I help you with?
How do you program a 2007 or 2008 Impala key fob?
go to programyourremote.com and it will tell you how to do it for free.
How do you program a key fob to a 2006 Chevy Malibu?
How do you program a key fob to a 2003 Chevy Malibu
How do you program a 1995 Lumina APV key fob?
To program any kind of key fob you have to take it to a dealership.
How do you re program key fob for Renault laguna1997?
How do I re program my key fob for renault laguna estate 1997?
Buy Toyota Avalon 2007 key fob?
change battery in a 2007 toyota avalion key fob
How do you reprogram 2006 tdi key fob?
2006 jetta tdi both key remote not working
How do you sync or program a replacement key fob for a 2007 Mini Cooper S with comfort access?
To program a replacement key fob for a 2007 Mini Cooper S with Comfort Access, start by entering the vehicle with an existing, functional key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "lock" button on the new key fob for about 10 seconds, then release it and turn the ignition off. Finally, test the new key fob to ensure it locks and unlocks the doors. If this method does not work, consult the owner's manual or a professional for assistance.
How do you program a Saturn 2001 sc2 keyless entry module?
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
How do you program a 2007 Saturn Vue key fob?
To program a 2007 Saturn Vue key fob, you need to be in the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" five times within 10 seconds. On the fifth turn, leave the key in the "On" position; the locks will cycle to indicate the vehicle is in programming mode. Press any button on the new key fob within 30 seconds to program it, and then turn the ignition off to exit programming mode.
How do you change battery 02 jetta key fob?
just pull the key apart it takes a lot to pull apart
How do you program key fob for harley Davidson sportster?
http://www.ehow.com/how_7456283_program-key-fob-harley-davidson.html
How can I program my key fob in a 2012 dodge journey?
The key fob programing requires the dealer's scan tool.
