0
1. turn ignition on (dash warning lights on)
2. If radio turned on, turn it off.
3. Press AS button in, and hold it in while turning radio on.
4. Wait approx 10 seconds (do not release AS button).
5. Radio should beep, and display should now read 10 - - - - (assuming no tries have been made in the past with the wrong code)
6. use pre-set button "1" to scroll the first digit in the display to the number you want (it goes 0,1,2,3,4,5,6,7,8,9 then back to 0)
7. Use pre-set "2" for second digit, etc.
8. Once display reads 10 followed by the four digit security code press and hold AS button for about 10 seconds, until the radio beeps.
9. If correct code entered display will now read "code" briefly, followed by"memory-U" briefly, then radio will reprogram it self.
10. If radio goes back to "safe" the code number is incorrect, or you mis-keyed it.
Note: entering the code incorrectly 10 times will render the radio useless.
After the first 3 tries you need to leave the radio on and the ignition on for increasingly long periods of time before it will let you try again. 7 safe need you to wait at least 30 mins, and more like 1 hour.
What else can I help you with?
How do you enter a radio code in zafira when radio says safe?
i have brought a car but the radio is showing safe mode and unfortunately i do not have a code are you able to supply the code radio is blaupunk 300 car is a vauxhall zafira 2002
How do you put your code into your radio on your Vauxhall Astra if it is in safe mode?
I Have a Astra Mark 4 vr500 radio please can you tell me how to entre the code Type your answer here...
How do you put your code into radio on your vauxhall omega 02?
radio says safe but cant put the code in
How can you get your Audi A6 radio off safe mode?
You need your operator's folder. In there is a booklet about the radio. it will have a code you need to enter to get the radio out of "safe" mode. the code is unique to each radio and car.
How do you use the radio code to use it after it has been in safe mode?
Turn the ignition to the on position but do not start the engine. Leave it sitting like that for one hour. The radio should then switch out of safe mode and allow you to enter the correct code.
How do you get the radio out of safe mode if you don't have the owner's manual for a 1997 VW Cabriolet?
Take the radio out of the dashboard, the code is on the side of the radio.
How do you remove the safe mode on radio of polo vivo?
Well, when your radio is in safe mode, it usually means that the security code needs to be entered to unlock it. You can find this code in your car's manual or sometimes on a card that came with the vehicle. Just enter the code using the radio preset buttons, and your radio should come out of safe mode, allowing you to enjoy your favorite tunes once again. Just take your time, follow the instructions, and soon enough, your radio will be back to normal.
How do you get a 1996 Audi A6 radio off safe mode?
I have an 1996 Audi Quattro A6 i changed my batteri and my radio went to safe mode. How do i get my radio off safe mode?
How do you take a bentley arnage radio off safe mode?
To take a Bentley Arnage radio off safe mode, you typically need to enter a security code. This code is usually provided in the owner's manual or can be obtained from a Bentley dealership. After powering on the radio, follow the prompts to enter the code. If you don't have the code, it's best to consult your dealership for assistance.
How do you get seat ibiza radio out of safe mode?
You have to Leave it on for a hour with the engine off then it will let you reinput the code
How do you get the radio in a 1995 VW Jetta out of safe mode after replacing the battery?
you have to enter the 4 digit safe code found in your owners manual
Where can the code be found for a 1998 Volkswagen Jetta radio in safe mode?
The Code is on the Radio, or in the Spare tirewell! if it is not on the radio, remove the radio, call dealer and give them the radio serial number and your VIN number. Some Dealers like to charge for this, most do not.
