hi i need to now how to change the fuel pump on my vauxhall corsa 1.4
thanks
steve
in the fuel tank, access it under the rear seat.
fuse box
wot number is the fuse for the fuel pump in a corsa c 2002? I have to change the fuel pump is this the correct way to cut the fuel supply??
The fuel pump relay on a Vauxhall Corsa 1.2 is typically located in the engine compartment fuse box. To access it, open the fuse box cover and look for the relay labeled for the fuel pump, often indicated in the diagram on the cover. If you have trouble locating it, refer to the vehicle's owner manual for specific details on the relay's position.
Its behind the water pump
its located in the fuel tank,there is an inspection cover under the rear seat under a black plastic cover
Probably a damaged fuel pump But you should try one before buying a new pump
wher is fuel pump located on diesel vauxhall veectra
Weak fuel pump? Bad fuel filter? Bad air filter? Plugged catalytic converter? I had the same problem with my Corsa, changing my mass air flow meter fixed it!!
To remove a fuel pump from a Vauxhall Astra fuel tank, first ensure the vehicle is safely elevated and supported. Disconnect the battery and relieve fuel system pressure by removing the fuel filler cap. Then, access the fuel pump by either removing the rear seat or accessing the tank from underneath, depending on the model. Disconnect the fuel lines and electrical connectors, unbolt the pump assembly, and carefully lift it out of the tank.
To change the water pump on a Vauxhall Corsa 1.0, first ensure the engine is cool and disconnect the battery. Remove the drive belt and any components obstructing access to the water pump, such as the timing cover. Unbolt the old water pump, clean the mounting surface, and install the new pump with a new gasket or sealant. Reassemble the components, refill the coolant, and reconnect the battery.
To change a Vauxhall Corsa timing change you need to first remove the rocker cover, the alternator tensioner, heat shield, water pump, engine mount, and crankshaft pulley. Now that you have found the timing change, unscrew the timing chain guides, remove old chain, and replace with new chain.