This can be dangerous. You are working with a lite explosive here & that needs to be respected. Unplug the battery if in-doubt. Find the back of the steering wheel. On the back side are two holes (one on the left & one on the right). A special TORX like bit will be required to remove the bolts that are in those holes and holding the air-bag in place. Once you loosen those bolts the air-bag will come off of the wheel. Then you will need to unplug the signal wire that goes to the bag.
http://www.6speedonline.com/forums/996-turbo-gt2/176814-diy-head-light-switch-remove-replace.html
996 has 6
Yes, you can fit Porsche 996 Turbo calipers on a Porsche 996 C4, but you will also need to ensure compatibility with the rotors and potentially upgrade the brake lines. The Turbo calipers are larger and provide better braking performance, but you may need to modify or replace the brackets for proper fitment. Always consult with a professional or a specialist to confirm the fitment and ensure safe installation.
you would need to disconnect the airbag then pop off the horn pad and remove the airbag then unbolt the steering wheel.
The Porsche 996 emergency hood release is located on the floor, next to the drivers seat. The hood release will be on the left-hand side of the drivers seat.
To remove the radio in a Porsche 996, first disconnect the car battery to avoid any electrical issues. Use a set of specialized radio removal tools to release the clips on the sides of the radio. Once the clips are disengaged, gently pull the radio out from the dashboard. Finally, disconnect the wiring harness and antenna before fully removing the radio.
Porsche 911 Carrera 996
porsche 996 with adapter
A Porsche gt3 is as follows: 996 MkI:189 mph 996 MkII: 190 mph 997 MkI: 193 mph 997 MkII: 194 mph
On the passenger side of car below gas filler tube. You must remove the front fender liner to gain access.
OEM Anti Freeze Only! Go to Porsche, and bring your American Expresss Card. :)
yes