answersLogoWhite

0

there are about 12 10mm bolts that hold the oil pan in place. remove them and the pan will drop right down.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Where is the oil filter located on a Toyota Cressida?

The oil filter is located on the front of the motor under the exhaust manifold


What motor oil do i use for a Toyota Cressida year 1988?

15W-30 Mobile 1 super S


Where is the oil pump on a 1986 Toyota pickup?

In the oil pan


How do you remove the oil pump on a 1991 Toyota Tercel?

Remove oil pan for access


How many quarts of oil in 1991 Toyota Cressida?

A 1991 Toyota Cressida typically requires about 4.5 quarts of oil when equipped with the 3.0L inline-six engine, including the oil filter change. It's always a good practice to check the owner's manual for the specific requirements, as variations may exist based on the engine type or any modifications made to the vehicle.


How much oil do you need for a 1986 Toyota tercel?

When you do a oil change on a 1986 Toyota Tercel it holds 4.5 quarts of oil. As recommended in the owners manual always double check your dipstick after changing the oil and putting in new oil.


How do you remove an oil pan from a 1986 Toyota pickup with a 22R ENGINE?

Drain oil, remove oil pan bolts (lots of them), take pan off. When reinstalling, don't use cork gaskets, they tend to degrade much faster and you will be right back under there.


How do you prime the oil pump on a 1991 Toyota V6 truck?

How do you prime the oil pump on a 1986 Toyota truck with 20r/22r engine


What wrench is used to remove 2007 RAV4 oil filter?

In order to remove the oil filter from a 2007 Toyota RAV4 you need to use an oil filter wrench. This wrench is a specialty to Toyota.


Where is the oil pressure sending unit on a 1986 Toyota Pickup 22R motor?

under the oil filter


Where is the dipstick at on six cylinder Toyota land cruiser 1986 model?

On a 1986 six-cylinder Toyota Land Cruiser, the dipstick is located on the passenger side of the engine bay, towards the front. It is typically positioned near the engine block, making it accessible for checking the oil level. To check the oil, simply pull the dipstick out, wipe it clean, reinsert it, and then remove it again to read the oil level.


1986 Toyota 22r. No oil pressure at the head. What could be wrong?

Defective oil pump.Defective oil pump.