Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
The rear wiper relay on a Peugeot 206 is typically located in the fuse box, which is found under the dashboard on the driver's side. You may need to remove the cover of the fuse box to access the relays. The specific relay for the rear wiper is usually labeled; consult the vehicle's manual for the exact location and identification. If you're having difficulty, checking the manual or a service guide can provide additional clarity.
If the windscreen wiper is electric or controlled by a switch, it has a fuse. The wiper fuse on a Peugeot 206 is located in the fuse box in the engine compartment.
how to remove and fit rear brake shoes on a peugeot 206 1.1
fuse 17 eng compartment 30A
14 Inch
200Nm
this is located near wiper-panel. its at the rear of the engine bay and should be near radiator bottle. most have a blue or black dustcap over them.
To change the front windscreen wiper motor on a Peugeot 206, first, disconnect the car battery to ensure safety. Remove the wiper arms by unscrewing the nuts at their bases, then detach the plastic cover to access the motor. Unscrew the old motor from its mounting, disconnect the electrical connector, and replace it with the new motor. Finally, reassemble the components in reverse order and reconnect the battery.
how to remove starter motor for Peugeot 206 1.4 hdi.
front wiper relay
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
To change the temperature sensor on a Peugeot 206, look at the underside of the passenger door mirror. There is a small black plastic bump sticking out of a hole in the mirror body. Remove the cover from the rear of the mirror and attach the new sensor.