0
you're going to need a Philips screwdriver and a flat blade screwdriver.
Pull the visor away from the retaining clips, and remove them.
Carefully remove the overhead interior lights...these once clear lenses are probably discolored by now because of the age of the car. I recommend you replace them...they're only a few dollars each and you'll like the extra light.
To the left and right of the interior light, you can see a hole (2), there are screws up there... you need to unscrew them. Once you have both screws out, carefully manipulate the trim back and up...it can be a little tricky, but it will eventually slide out. Take note, there are two of these trims units, one on each side. They slide in back of the rear view mirror....and they are fragile, so don't bend these too much. 450's are old cars and the vinyl and foam materials used in these units will be brittle with age.
Once you remove the trim, you can access the screws on the base of the visors...remove the visors. That's it.
DM
What else can I help you with?
What are the major factors in the Battle of Gettysburg?
knifes and sisors
How do you remove the drag link 1978 Mercedes 450sl?
¿quienes realizaron los primeros graffitis en argentina?
What Size tool to remove oil drain plug on Mercedes 450sl?
You need a 14MM Allen key or similar sump plug key.
What is those things called that you cut with?
They are called scissors, but you pronounce it like sisors.
How do you remove and replace ECU 1974 Mercedes 450sl?
To remove and replace the ECU in a 1974 Mercedes 450SL, first disconnect the car's battery to ensure safety. Locate the ECU, which is typically found under the dashboard or near the firewall, and carefully unplug the connectors. Remove any mounting screws or brackets securing the ECU, then take it out. To install the new ECU, reverse the process: secure it in place, reconnect the connectors, and finally reconnect the battery.
What is the best year for Mercedes 450sl?
1979
Where is the fuse on 1975 Mercedes 450sl?
in barbados
How do you remove a Mercedes 450SL hazard switch?
To remove the hazard switch from a Mercedes 450SL, first, ensure the ignition is off and disconnect the battery for safety. Then, carefully pry off the switch cover or panel surrounding the hazard switch using a plastic trim tool. You can then access the switch by unscrewing any retaining screws and gently pulling it out from its housing. Finally, disconnect the wiring harness attached to the switch to complete the removal.
Where is the Fuel Pump Relay on a Mecedes 450SL found in the car?
Remove the glove box liner and there you will find it! My relay has 5 pins, but the replacements have 6, have I found the right relay
How do you give the sisors to her?
Your question doesn't make much sense. How do you give the scissors to WHO? And why would you ask that here?
How do you remove a gas tank from a 79 Mercedes 450sl convert?
To remove the gas tank from a 1979 Mercedes 450SL, first ensure the vehicle is safely lifted and secured. Disconnect the fuel lines and electrical connections, then remove any protective covers or straps holding the tank in place. Carefully lower the tank from its position, taking care to avoid damaging any surrounding components. Finally, ensure all remnants of fuel are cleared and the area is clean before proceeding with any repairs or replacement.
How do you jump start a 1978 Mercedes 450SL?
trunk is the battery
