Remove bellhousing from citroen xsara picasso
To remove a broken end of a dipstick from a Citroën Picasso, first, ensure the engine is off and cool. Use needle-nose pliers or a magnet to grasp and carefully pull out the broken piece from the dipstick tube. If it’s too deep to reach, you may need to use a flexible retrieval tool or consult a mechanic for assistance. After removal, check the dipstick for any damage and replace it if necessary.
According to the manual,you have to remove the front bumper
Unscrews from base on roof external
take out bolts & wires lift it up & put it on floor
wiggle it a little and then pull out. it is so easy.
were is engine cover wot does it do
wiggle it a little and then pull out. it is so easy.
You cant as no one on the internet will tell you
how to remove broken dipstick tube ford winstar
Cut the dipstick tube with a tubing cutter below broken dipstick and remove Use rubber tubing and hose clamps to reattach tube pieces
you have to remove the frot cover,and so you can see the two units