To remove the drive shaft from a Citroën Xsara Picasso, first, securely lift the vehicle and remove the front wheel on the side of the drive shaft you are working on. Next, disconnect the lower ball joint and the outer CV joint from the hub assembly. Then, unbolt the inner CV joint from the transmission or differential. Finally, carefully slide the drive shaft out from the hub and transmission, ensuring you do not damage any seals or components during the process.
Remove bellhousing from citroen xsara picasso
According to the manual,you have to remove the front bumper
Unscrews from base on roof external
Citroën Xsara Picasso was created in 1999.
wiggle it a little and then pull out. it is so easy.
You cant as no one on the internet will tell you
wiggle it a little and then pull out. it is so easy.
Try scribd.com bsi operating systems for xsara Picasso and xsara
you have to remove the frot cover,and so you can see the two units
It tips forward. remove headrest, and release to sprung catches at rear of seat, it then will tip forward
Under the passenger's seat for a right-hand drive car, or under the driver's seat for a left-hand drive car.
The fuse for the windscreen washers on a Citoen Xsara Picasso is located in the engine. It is inside the compartment box.