answersLogoWhite

0

First, the rubber cover on the back of the bulb must be removed. Remove the connector, then loosen the torque screws. The locking ring can now be turned counter-clockwise in and the headlamp can be taken out.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you remove a door panel from a 2003 vw polo?

The 2003 fall ball Polo door panel is held in place by eight retaining clips and two screws. Remove the two screws. The screws can be found near the door latch handle. Remove the retaining clips by prying outward.


How do you change a headlight bulb on a vw polo?

To change the headlight bulb on a 2003 VW Polo you must first remove the rubber cover from the back of the bulb. Pull off the connector and loosen the 2 torque screws to allow the black plastic locking to turn. Turn the locking ring counter-clockwise to remove and replace the bulb.


How do you remove the gear knob on a 1996 VW polo?

The knob just screws off.


How do you change sparkplugs on 2003 VW Polo?

Begin by removing the spark plug wire from the top of your 2003 VW spark plug. Remove the spark plug with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install your new spark plugs.


How do you remove starter from 2003 VW Beetle?

To remove a starter from a 2003 VW Beetle, first you need to disconnect the battery. Then remove the bracket holding the wires, remove bolts mounting the starter, and take it out.


Where is the fusebox on a vw polo 03?

In a 2003 VW Polo, the fusebox is located inside the car, on the driver's side. To access it, open the driver's door and look for the fusebox cover on the side of the dashboard. You may need to remove the cover to access the fuses. There is also a secondary fusebox located in the engine compartment for certain fuses.


Fuse box layout vw polo 2003?

on the driver's side - big grey plastic compartment


How do you replace coil on VW Polo 2003?

To replace the coil on a 2003 VW Polo, first disconnect the battery to ensure safety. Remove the engine cover if necessary, then locate the ignition coil, which is typically mounted on top of the engine. Disconnect the electrical connector and unscrew the coil from its position. Replace it with the new coil, reattach the connector, and reconnect the battery before starting the engine to check for proper function.


Remove air box housing vw polo 1.4?

how tremove aircon housing unit under the left glove comparmentona polo 1.6


How do change a 2003 Volkswagen Passat tire?

how do I remove a tire from a VW 2003 Passat


Where is the VW Polo made?

New VW Polo for EU market is made in Bratislava, Slovakia.


How do you turn off airbag in vw polo 2000?

How do you turn off airbag in vw polo 1999