0
What else can I help you with?
Your polo hatch back 2003 instrument cluster smook wont tart?
hy i got the same problem mow i need a instrument cluster dont know wher to get one
How do you remove a tail light bulb on 2003 ford focus?
lift the tailgate up,and you will see a Phillips screw or star screw,undo that then look up under the cluster from inside the hatch you will see a black plastic screw. undo that then pull cluster off from outside the hatch you will see where you change the bulbs.just reverse the procedure to assemble.
How do you remove the taillight assembly on the rear hatch so that you can replace the stoplight and backup light bulbs?
Open hatch and remove strap and handle. Remove rear panel attached to hatch by popping off of hatch. Be careful because the clips are not strong. Use bulb 921 @ 18W.
How do you Change rear lights on Renault scenic?
To change the rear lights on a Renault Scenic, start by opening the rear hatch and locating the access panel or screws securing the light cluster. Remove the screws or clips and gently pull the light cluster out from the body of the car. Disconnect the wiring harness and replace the burnt-out bulb by twisting it counterclockwise. Reassemble the light cluster by reversing the process and ensuring it is securely fitted.
How do you access the RH side rear light bulb cluster on a vauxhall corsa?
To access the RH side rear light bulb cluster on a Vauxhall Corsa, open the rear hatch and locate the access cover on the inside of the rear light assembly. Remove the cover by unscrewing any screws or clips if present. Once open, disconnect the wiring harness, then twist the bulb holder counterclockwise to remove the bulb cluster. Replace the bulb as needed, reassemble the components, and ensure everything is securely fastened.
What car company makes the Vectra C?
Chevrolet is the parent company of the Vectra C which was manufactured in 2002 through 2009. There were three basic models a four door sedan, a five door hatch back, and a five door station wagon.
How do you replace rear light cluster unit on peugeot 307?
To replace the rear light cluster unit on a Peugeot 307, first, open the rear hatch and remove the access panel in the trunk interior to expose the light cluster. Disconnect the electrical connector and unscrew the securing bolts of the light unit. Carefully pull the light cluster out and replace it with the new unit, reconnect the electrical connector, and secure it with the screws. Finally, test the lights to ensure everything is functioning properly before replacing the access panel.
How do you change the brake light on Honda CRV 2004 door hatch?
Open the hatch - remove the protective cover from the housing - twist out the bulb holder - remove and replace bulb - re-install in the reverse order.
How do you remove rear hatch door panel to fix lock on subaru outback?
To remove the rear hatch door panel in order to fix the lock on a Subaru Outback you will need a Phillips-head screwdriver, small flat screwdriver, trim pry tool, and tack puller. Using these items you need to remove the push clips and pry the trim from the hatch.
What could cause water to leak inside the trunk of a 1991 Chevy Camaro?
Rear hatch leaking on 3rd gen Camaro,Z28-IRoc-z/Trans Am/Firebird-GTA The seal between the window and the hatch is worn. Any glass shop will reseal this.to do yourself buy a glass sealer or tar. remove inner hatch cover, there are I believe 4 bolts holding the window to the hatch. remove them. Have a large 4by4 holding up the hatch. Remove the hatch struts. Clean off old sealer under window an hatch. Reseal the hatch/window. Put the struts back and retighten all the bolts snug not too tight. I have had the same problem. This will fix ur water leak problem..
How do you disable daytime running lights on a 2002 Pontiac grand prix?
open the driver side door and you will see a little hatch , remove the hatch . its a little hatch located on the dash in the dorr jam. remove it and you will see 2 wires running into a metal heatsink. just unplug harness. Brian Z.
How do you change the cabin air filter on a 2009 Pontiac Vibe?
Open the glove box, squeeze the sides in and remove the glove box (easy to re-install). Behind you will see a long horizontal rectangular hatch. Depress the plastic latch and remove the hatch. Remove old filter, clean out any loose debris, replace with new filter. Put the hatch and glove box back in and you are done.
