answersLogoWhite

0

What else can I help you with?

Related Questions

How do you change oil on vectra JS 11?

Get under the vehicle, have a bucket ready, remove bolt from bottom of sump (can't miss it), change oil filter as well. Use good quality oil.


Where is the oil pump located on the 1998 2.2lt vectra?

its in the engine above the sump mate .


What size torx bit do you need for the oil sump plug on a holden vectra?

T45


How do you change sump gasket on ford transit 100 2.5 2000 model?

Drain off the oil first, then remove the sump bolts. Hey presto, The gasket it there, remove and refit new one, or bodge it with silicone sealant.


How do you Change oil Saab 9 3?

Remove oil sump plug, drain oil. Replace oil filter. Replace oil sump plug. Refil with Mobil 1 oil


How do you remove the oil sump on a vw beetle?

Easy, put the car on ramps. Remove the sump guard plasctics. Drain the oil from the sump. Disconnect the oil level sensor wires. Undo the 3 bolts on the bell-housing that holds unto the sump, you will need a 5mm ball-end allen socket. Undo the 20, 10mm head bolts on the sump bottom. Remove the sump, you may need to tap with a soft-head hammer. This is one of the easiest sumps to remove with the engine in the car.


How do you remove a sump vw t4?

To remove the sump from a VW T4, first ensure the vehicle is securely lifted and supported. Drain the engine oil and remove any components obstructing the sump, such as the oil filter. Unscrew the sump bolts and gently pry the sump away from the engine block, taking care not to damage the gasket surface. Finally, clean the mating surfaces before installing a new gasket and sump.


How do you drain oil in a Renault laguna?

Remove nut from bottom of sump.


How do you remove a sump on a Peugeot 106?

To remove the sump on a Peugeot 106, first, ensure the vehicle is securely raised and supported. Drain the engine oil and remove the oil filter. Next, detach any components obstructing the sump, such as the exhaust or crossmember, and then unscrew the bolts securing the sump to the engine block. Finally, gently pry the sump away from the engine, taking care not to damage the gasket or mating surfaces.


Where is oil drain plug on a diesel escort 2000?

its at the back of the sump box


How do I remove an oil sump on a Fiesta 1.3 2002?

To remove the oil sump on a 2002 Ford Fiesta 1.3, first ensure the engine is cool and disconnect the battery. Drain the engine oil and remove any components obstructing access, such as the exhaust or crossmember. Unbolt the sump from the engine block, carefully prying it loose if necessary, and clean the mating surfaces before installing the new sump with a fresh gasket. Reassemble all removed parts and refill the engine with oil.


How do you remove Peugeot 306 sump?

To remove the sump from a Peugeot 306, first, ensure the vehicle is safely lifted and supported, then drain the engine oil. Remove the oil filter if necessary, followed by the bolts securing the sump to the engine block. Carefully pry the sump away from the engine, taking care not to damage the gasket or mating surfaces. After removal, clean the surfaces thoroughly before installing a new gasket and reattaching the sump.