On a 2004 Mazda3 with a 2.3L engine, the thermostat is located near the engine's water pump, typically on the engine block. To access it, you will need to remove the upper radiator hose, which is attached to the thermostat housing. The thermostat itself is housed within this assembly, making it necessary to detach the housing to replace the thermostat. Always ensure the engine is cool before attempting any work on the cooling system.
how do you replace thermostat for 2004 cavalier
How do I replace the thermostat in a 2004 1.8T jetta?
between engine and tranny, on the top connected to pipe cooling system
It is at the engine end of the top radiator hose.The housing is the thermostat housing and the thermostat is located therein.
The thermostat for a 2004 Buick Century is located in the engine compartment, specifically on the engine's intake manifold. To access it, you'll need to remove the upper radiator hose that connects to the thermostat housing. The thermostat itself is housed within the thermostat housing, which is usually secured by a couple of bolts. Ensure the engine is cool before attempting to access or replace the thermostat to avoid burns or injury.
To change the thermostat on a 2004 Mazda 3, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one, and reassemble the housing and hose. Finally, refill the cooling system with coolant and reconnect the battery terminal.
To change the thermostat on a 2004 GMC Savanna van, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the hoses connected to the thermostat housing. Unbolt the housing to access the thermostat, replace it with a new one, and reassemble by reversing the steps. Finally, refill the cooling system with coolant and check for leaks.
To replace the thermostat on a 2004 BMW 530i, first, ensure the engine is cool and disconnect the battery. Remove the engine cover and the air intake duct to access the thermostat housing, which is located near the engine block. Drain the coolant, then unbolt the thermostat housing, remove the old thermostat, and install the new one with a new gasket. Reassemble everything, refill the coolant, and reconnect the battery.
Should be in a removable housing at the engine end of the upper radiator hose
remove and replace engine coolant temperature(ect)/chevy 2004 trailblazer
To replace the thermostat on a 2004 Chevrolet Classic with a 2.2 Ecotec engine, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant and remove the upper radiator hose from the thermostat housing. Unbolt the thermostat housing to access the thermostat, replace the old thermostat with a new one, ensuring the gasket is in place, and reassemble the housing and hoses. Finally, refill the coolant, reconnect the battery, and check for leaks.