To replace the back indicator bulb in an Opel Corsa, first, ensure the vehicle is turned off and the keys are removed. Open the rear hatch and locate the tail light assembly; you may need to remove screws or clips to access it. Once exposed, twist the bulb holder counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Reassemble the assembly, ensuring it’s securely fastened, and test the indicator to confirm it’s working.
How do you replace a front indicator bulb in a Saab 93
Pop the bonnet up, then look at the back of the headlight it should be a grey plastic plug on the outside edge of the headlight, this will pull out quite easily, if not give it a twist, push in and twist existing bulb to release, then replace bulb, then put plug back in.
Begin by removing the connector from the back of your VW drivers side indicator light. You can remove the light bulb by pushing it in and turning at the same time. Reverse the process to install your new drivers side indicator light bulb.
open the bonnet and unscrew the bulb housing and pop it out
what do you do if wingnut stuck when replacing a rear indicator bulb on a vw beetle
unscrew plug 1/4 of a turn anti clockwise. pull out old bulb replace then put plug back opposite to how you removed.
The indicator panel should by carefully pried out. Then you can change the bulb.
To replace the shift indicator bulb on a 1991 Volvo 740 wagon, start by removing the center console cover surrounding the gear shift. Carefully detach the wiring connector from the shift indicator assembly. Then, remove the old bulb from its socket and replace it with a new one. Reassemble everything by reconnecting the wiring and securing the console cover back in place.
pull the top off of the shift indicator..replace bulb.. !!! I believe they are talking about the shift indicator in the instrument panel. An astro van is on the column and the indicator on the newer ones I believe is an LCD, 95 may be like my Tahoe though where there is just a back lit line under a printed legend. If that is the case I would assume it is a bulb but don't know for sure.
To replace the front indicator on a Mitsubishi Magna, first, ensure the vehicle is turned off and the keys are removed. Remove the screws or clips securing the indicator assembly, then gently pull the assembly out of the housing. Disconnect the wiring harness from the old indicator bulb, replace it with a new bulb, and reattach the wiring. Finally, reinsert the assembly back into the housing and secure it with the screws or clips.
Inside the bonnet at the rear of the indicator light fitting is a steel ring. This is a clip-in spring fitting. Once unclipped the indicator unit slides out. The bulb is attached by a simple push on fitting.
Pull the switch and change bulb in rear. 1 for night light and 2nd for fog light indicator.