Replacing the front wing on a Peugeot 307 you should find a replacement part and consult the cars manual. Line up the new front wing, bolts and clips.
how do I replace 307SW wing mirror
On a 205 gti, you have some bolts along the top of the wing(under bonnet shut line), also 2 or 3 along back side of wing(behind door shut), and then some mastik type stuff on inside of wing itself :)
change wing mirror on 2008 peugeot
To fit a front wing on a Peugeot 206, first, ensure the vehicle is on a stable surface and securely supported. Remove any screws or fasteners securing the old wing, including those in the wheel arch and under the hood. Carefully detach the old wing and align the new wing in place, securing it with the appropriate screws and fasteners. Finally, check for proper alignment and ensure all connections are tight before completing the installation.
To remove a front wing from a Peugeot 106, first, ensure the vehicle is securely supported and the battery is disconnected. Remove any trim pieces and bolts securing the wing to the body, which may include screws along the top edge, bolts inside the wheel arch, and possibly under the front bumper. Carefully pull the wing away from the body, taking care not to damage any adjacent components. Finally, if applicable, disconnect any electrical connections for indicators or side lights before fully removing the wing.
Ok you will need to take the three bolts off from the top of your wing under the bonnet (not the two large bolts at the top as those bolts are for the bonnet arm). You will then need to take the three bolts from the side of the wing these can be seen when you open the door from behind the wing. The last bolt is at the front under the bumper (you shouldn
Its In the washer bottle which is located inside the front wing. remove wheel and wheelarch liner to gain access to it.
you have to go to a automobile specialist.
take off old wing fit new wing
To replace the front wing of a Citroën Saxo, start by safely lifting the vehicle and removing the front wheel on the side of the wing being replaced. Next, unbolt the wing from the chassis, which typically involves removing screws or bolts located along the edge of the wing and around the door. Disconnect any electrical connections if applicable, then gently pull the old wing off. Finally, position the new wing in place, secure it with bolts, and reattach the wheel before lowering the vehicle.
To replace the right front wing on a Honda Jazz, first, ensure the car is parked on a level surface and disconnect the battery. Remove the wheel and inner fender liner to access the bolts securing the wing. Then, unbolt the wing from the A-pillar, door, and front fender, carefully prying it away from the car. Finally, install the new wing by reversing the removal steps, ensuring all bolts are tightened securely.