answersLogoWhite

0

Open the boot and remove the plastic cover. Then put your hand in (careful not to cut yourself on the sharp metal edges) and ease out the bulb holder working from inside. You should disconnect the wire connector first. The bulb holder is held in place by plastic clip fitting on the sides which you have to compress to let the bulb holder pass through the metal onto the outside. Once the bulb holder has been removed from the car you can then open it and change the bulb. Reverse these steps for refitting. It's a fairly tricky job but it doesn't take very long and no special tools are required.

User Avatar

Wiki User

12y ago

What else can I help you with?