To replace the rear trunk brake light on a 2007 Mercedes CLK 350, first, open the trunk and locate the light assembly. Remove the trim panel or cover if necessary, then twist the light socket counterclockwise to release it from the assembly. Pull out the old bulb and replace it with a new one, ensuring it's securely in place. Finally, reassemble the light socket and trim panel, and test the brake light to confirm it's functioning properly.
From inside the trunk.
To replace the middle brake light on a C230 Mercedes, start by opening the trunk and removing any covers or trim pieces that obscure the light assembly. Unscrew the brake light housing, then gently pull it out to access the bulb. Replace the old bulb with a new one, ensuring it's securely fitted, and reassemble everything by reversing the removal steps. Finally, test the light to ensure it functions properly before closing the trunk.
To replace the third brake light on a 2004 Mercedes E-Class, first, open the trunk and remove the trim panel covering the brake light assembly. Disconnect the electrical connector and remove the screws securing the brake light. Replace the old light with the new one, reattach the screws, and reconnect the electrical connector before replacing the trim panel. Test the light to ensure it functions properly.
Inside the trunk.
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
From inside the trunk.
To replace the brake light bulb on a 2002 Mercedes CLK320, first, open the trunk and locate the taillight assembly. Remove the screws or clips securing the taillight, then gently pull the assembly out. Turn the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Ensure everything is securely fastened before testing the new brake light.
engine serial number S350
You can access the brake light bald through the trunk compartment. Remove the trunk liner from the tail light assembly. Push the brake light connector in and turn at the same time. The brake lightbulb will come out. Reverse the process to install the new brake light
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
Follow the link below, labeled "How to replace a Lexus IS300 tail light"
Should be able to get to it from the trunk.