you need to remove the tail light lens. There is a large round plastic cap located behind the lens in the truck .Remove the cap and there is a black plastic nut that you can remove by hand, that will release the lens and you will be able to replace the bulbs.
how do you replace a taillight on a Honda 2002 Civic?
Open rear hatch, there are two screws in taillight lens, take them out, the lens will lift out, turn the socket and it will relese, replace bulb, (I would recommend using some dielectric grease on bulb socket while you have it out), replace in reverse order. AJ
Remove the taillight assembly to gain access to the bulbs
To replace the taillight bulb on a 2005 Ford 500, start by opening the trunk and locating the taillight assembly. Remove the plastic cover or screws securing the assembly in place, then pull the assembly out gently. Turn the bulb socket counterclockwise to release it, replace the old bulb with a new one, and reassemble the taillight by reversing the steps. Finally, test the new bulb to ensure it functions properly.
unscrew it and screw in the new bulb
To replace a taillight bulb on a Saturn L100, first, open the trunk and locate the taillight assembly. Remove the screws or clips holding the assembly in place, then gently pull it out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Make sure the new bulb is securely in place before closing the trunk.
How I have to do for replace a little bulb on the ODO speedometer cable on 1973 Super Beetle ?
what do you do if wingnut stuck when replacing a rear indicator bulb on a vw beetle
How_do_you_replace_the_headlight_bulb_located_on_a_2000_VW_Beetle
Taillight bulb replacment/Taillight housing replacement * Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
To replace a taillight on an Oldsmobile 88, first, open the trunk and locate the access panel or screws securing the taillight assembly. Remove the screws and gently pull the assembly out from the vehicle. Disconnect the wiring harness and replace the old bulb with a new one, then reconnect the harness and reassemble the taillight by securing it back in place. Finally, test the new bulb to ensure it's working properly.