answersLogoWhite

0

First, locate the portion of the leather dust boot just below shifter knob. The boot is connected to the shifter by a lock ring that you can feel under the leather boot. Rotate the top of the leather boot about 45 degrees and push down. It takes a little muscle so be persistent. Now, you should be able to see the bare metal selector post connected to the shifter knob/handle. Now the fun part. Simply pull straight up with as much force as possible. Be patient and be careful to avoid hitting and damaging your rear view mirror when it does eventually pop off. Installation is simply the reverse. The new shifter handle will click into place when ample down force is applied. It is a very basic procedure requiring no tools and minimal skill.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you replace a gear knob gaiter in your BMW 318i?

how to remove gear shift knob on bmw318


How do you Replace the Shift knob in a 2000 Volvo s70?

To replace the shift knob in a 2000 Volvo S70, first, ensure the car is in the "Park" position. Gently pull the old shift knob upwards to release it from the lever; it may require some force. Once removed, slide the new shift knob onto the lever until it clicks into place. Finally, test the knob to ensure it is securely attached before driving.


How do you replace a gear shift knob in a 2003 Hyundai Accent?

To replace the gear shift knob in a 2003 Hyundai Accent, first, ensure the vehicle is in park and the ignition is off. Carefully twist the existing knob counterclockwise to remove it from the shift lever. Align the new shift knob with the lever and twist it clockwise until it is securely in place. Finally, check that the knob is firmly attached and functions correctly before driving.


How do you remove gear shift knob on slk 320?

To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.


How do you change the gear shift knob on a 2002 Volvo S60 T5?

Removing the shift knob is actually very simple if you have the Volvo "Spaceball" setup: Just push down on the knob and rotate it counter clockwise about 90degrees then pull up to remove the knob from the shaft. Depending on what type of shift knob you are replacing it with, installation of the new one may differ. See: http://forums.swedespeed.com/showthread.php?136135


How do you remove and replace a automatic transmission gear shift knob on a 2004 Chevrolet Cavalier?

Check


How do you remove gear shift knob on a 2000 S70?

To remove the gear shift knob on a 2000 Volvo S70, first ensure the gear lever is in the "Drive" position. Then, locate the small plastic cover at the base of the knob and pry it off gently with a flat tool. Next, you may need to press down on a release button or tab located beneath the knob to unlock it. Finally, pull the knob straight up to detach it from the shift lever.


240 Volvo will not shift out of park?

there is a little lever you have to switch to the left. It is inside the compartment where the on the bottom where the gear shifter knob comes out.


How do you remove the gear shift knob on a 2000 Daewoo Lanos?

How do you remove the gear shift knob on a 2000 Daewoo Lanos?


How do you replace the gear shift knob on a Porsche Boxster?

On my 2000 Boxster it just pulls off the lever.


How do you remove the gear shift knob off of a 03 silverado?

To remove the gear shift knob on the '03 Silverado, first pry off the cover that has the shift pattern on it. Then, remove the screw that is under that cover to remove the knob.


How do you replace 1996 pulsar N15 gear knob?

To replace the gear knob on a 1996 Nissan Pulsar N15, start by unscrewing the existing knob, which may involve turning it counterclockwise or pressing a release button, depending on the specific design. Once removed, slide the new gear knob onto the gear lever, ensuring it fits securely. If necessary, tighten any screws or fasteners that come with the new knob to keep it in place. Finally, test the gear shift to ensure smooth operation.