In order to probably repair the heater core in your 2000 New Beetle, you will probably have to get the entire heater core replaced.
To replace the heater hose on a 2000 Savana van, first ensure the engine is cool and disconnect the battery. Locate the heater hoses, typically running from the engine to the heater core, and use pliers to loosen the hose clamps. Remove the old hoses, then install the new hoses by sliding them onto the heater core and engine connections, securing them with the clamps. Finally, refill the cooling system with coolant and check for leaks.
replace the blower motor resistor. it is located on the firewall near the heater hoses.
Check the heater hoses on the right side of the engine. If one hose is hot and the other is not , you might have a blocked heater core. Or the blend door actuator might not be operating correctly.
you may not have the heater water hoses plugged in
Follow the heater hoses from the engine. They will lead right to the heater core.
Remove the water supply hoses from your heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
just splice the two heater hoses that go through to the heater core the together
Dealer item.
where is the heater core at
where is the heater core at
No it will not, it will just back flush the heater core and clean it out.