To replace the reversing bulb on a Rover 214, first, ensure the car is turned off and parked safely. Access the bulb by removing the light cluster; this may require unscrewing or unclipping it. Once the cluster is free, twist the bulb holder counterclockwise to remove it, then replace the old bulb with a new one, ensuring it’s securely in place before reassembling the light cluster. Finally, test the new bulb by reversing the vehicle to confirm it’s functioning correctly.
To change a power steering belt on a Rover 214, unbolt the power steering pump and pry the belt off the pulley. Replace with another steering belt and reinstall the steering pump.
Does your rover 214 have a k series engine if it does it could be a problem with your head gasket
An alternator for a Rover 214 can be ordered from the dealer or from a local auto parts store. In addition, an alternator can be found at a junk yard.
the rover model is early rover 200 series ie, 214, 216.
420i.
my rover 214 sli is very hard to start from cold once its going its no problem i took the filter cover off poured a little petrol into the carb and away she goes?
Fn T
got a tape measure??????????????????
If you have to ask, take it to a garage.
the crankshaft sensor lokited ner the flaywil bihind the transmisin
Located at the rear of the waterpump, under the inlet manifold
its near the battery and it is a black box with 2 wiring plugs underneath it.