says how to do it clearly in the owners Manuel
but all u have to do is open the hood clip it off
I would replace the turn signal switch.
Answer 1: You may need to replace the bulb. Answer 2: In my experience it indicates that one (front or rear) of the right turn signal bulbs has blown and needs replaced. If it blinks normal speed with the left turn signal then it's not likely to be the flasher relay. Hope this helps.
remove the two screws on the bottom of the turn signal and pull out
The turn signal cam is broken on the switch side. You need to replace the turn signal switch assembly.
how do you fix turn signal
You can replace the front bearing on 2003 Citroen Relay using air tools.
Remove entire headlight assy with 2 screws and 2 snaps, pulls out through front. I also took off the front grill with 4 snaps to avoid scratching it.
To replace the front signal bulb on a 2003 Acura EL 1.7, first, open the hood and locate the headlight assembly. Remove the retaining screws or clips securing the assembly, then carefully pull it forward to access the bulb socket. Twist the socket counterclockwise to remove it, then pull out the old bulb and insert the new one, ensuring it's securely in place. Reassemble the headlight assembly by reversing the removal steps and test the signal light to ensure it works.
how to change the lug nuts in the front of a 2003 ford focus
The 2003 Chevrolet Silverado turn signal switch is located below the dashboard, on the drivers side of the passenger compartment. The turn signal switch simply plugs in and out.
its in the front tire under the gas tank
To replace a turn signal switch on a 2003 Pontiac Aztek, also known as a flash relay, the steering column must be removed. The flash relay is located under the turn signal. Remove the mounting hardware and the unit can be taken off.