You have to remove the balancer from the crank pulley. There are 4 13mm bolts holding it on. The easiest way is to remove the tire and inner fender tub.
mitsu.td04-15g
replace ign sw on 1991 volvo 240
You ought to be able to get at them from inside the truck.
To replace the oil trap on your Volvo, please consult your owners manual. There should be a guide in there to help you with this repair.
6.1 if its the turbo 2.3L model
The oil pan from a Volvo 850 turbo is generally not the same as the one from a non-turbo Volvo 850. The turbo models often have specific design features to accommodate the turbocharger and may have different oil capacity or baffle designs. Therefore, it's important to use the correct oil pan specific to the model and engine type for optimal performance and compatibility.
You can remove the old serpentine belt on your 2004 Dodge Ram by loosening the tensioner pulley. Put the new serpentine belt on and tighten it with the tensioner pulley.
Yes, but your Volvo will have very little power without the turbo.
i got mine for £10 each from the scrappy .
The firing order for a 1995 Volvo 850 Turbo is 1-3-4-2. This means that the cylinders fire in that specific sequence to ensure smooth engine operation. The engine has a five-cylinder layout, which is characteristic of Volvo's design for this model.
The diesel turbo can only fit on a Volvo 850 with a little fabrication.
I own a 1989 745 Turbo Wagon &, a 1996 960 both absolutely trouble free.